Gadget Guides

EZCast Beam V3 Projector review – Magic in a box? – The Gadgeteer

38Views
Spread the love


REVIEW – Projectors have all the time appeared magical to me. Perhaps it’s the scale of the picture, or hanging the bedsheet at a sleepover for a late night time viewing. School rooms have been all the time set as much as cowl home windows and dim the lights, whereas getting a projector arrange at dwelling all the time tended to carry out the issues in your plan. Know-how has come a good distance and projectors have reduced in size. EZCast has a brand new mannequin referred to as Beam V3. Might this be one which rekindles that magic I bear in mind?

What’s it?

The Beam V3 is a brief throw, wifi-enabled projector designed to work with quite a lot of sources supporting ceiling and even portrait projection all inside an inexpensive price range.

What’s within the field?

  • Beam V3 Projector
  • Energy adapter
  • Distant management
  • USB Wifi adapter
  • Instruction handbook
  • Foam stands

specs

Projection Information: LCD know-how w/ 200 lumens, 1000:1 distinction
I/O: Enter – 1080p | Output – 1280×720
Throw: 1.5-2m (1.5:1 ratio)
Focus: Handbook solely
Display dimension: 32-176″ 16:9 facet ratio
Bodily Inputs: USB 2.zero, HDMI, MicroSD
Wifi: Included 2.four/5G USB Wifi adapter
Audio: 5w Speaker, three.5mm audio out jack, BT four.1
Dimensions: 230 x 169 x 90mm | 1200g

Design and options

The Beam V3 from EZCast has the look of a standard projector with a big lens and a corresponding large lens cap for protecting mud off when not in use.

The lens is targeted manually which I respect to actually have the ability to dial it in.

From the highest view you may see all of the handbook controls for powering on, navigation, and focusing the picture. You can even see the complete width slot, which is beneficial for telephones and tablets chances are you’ll wish to join with a USB cable.

Right here’s what an older full dimension iPad seems to be like in a vertical orientation (Be aware that it’s going to not slot in panorama mode, however an iPad mini would).

On the underside there are 4 rubber toes if you happen to’re fortunate sufficient to have the ability to tilt the platform you set the projector on. In any other case there’s the handbook screw foot to elevate up the entrance. You’ll additionally spot a round vent and all of the certification markings.

That is the included Wifi adapter.

It will get inserted into this again port, the place it nearly utterly disappears.

In the event you have been questioning what the tetris-looking foam stands have been within the unboxing picture, effectively right here’s your reply. They’re used to position the projector right into a ceiling mode and permit for air flow below the unit).

Or in portrait mode for all that vertical video content material you will have that I’ll chorus from commenting on.

There’s after all a useful distant so you may by no means contact the controls on the highest of the projector once more.

Setup

In relation to establishing a projector, each scenario goes to want some tweaking. Until you’re changing an current projector, you’re going to wish to experiment as a result of there are a whole lot of variables to think about.

We set the Beam V3 up in a small bed room the place we wanted a fairly brief throw. The projector sits on a shelf somewhat over 5′ off the bottom and initiatives onto a wall eight′ away. We lately added a motorize drop display for a extra reflective background and to permit for artwork on the wall when not projecting.

The arrange steps are as you’ll anticipate.

  1. Place the projector
  2. Join the ability adapter
  3. Join any further enter sources
    1. The Wifi adapter (if desired, and enter your wifi information)
    2. Roku Stick+ (in our case)
  4. Energy on
  5. Modify picture settings

That is what the projection seems to be like after adjusting for distance, dimension, focus, keystone and shade settings. For us it was useful to leap into Netflix and get a film on the display to regulate for shade as all of the adjustment screens are fairly monotone. Pace Racer is a good film for that so far as insane shade composition.

As you may see above there are menu choices for choosing the settings and which supply you wish to use. For a visible reference, this subsequent shot reveals the one window of the room (shade half drawn) on to the left. Photograph was taken round three:30pm within the afternoon on a fairly vivid day.

Efficiency

As you may need guessed we had already been utilizing a projector in that room. The brief distance between the partitions had resulted in not with the ability to get the picture as small as we wished and the main target was nearly proper, however not fairly.

Out of the gate the Beam V3 was very easy to arrange, and modify for an ideal match together with the throw and focus. The one tweak (as a result of top of the shelf it’s resting on) is we needed to barely elevate the again of the projector to intention it down additional.

The inbuilt speaker goes lots loud, however you’ll doubtless need some extra depth to not point out audio separation as a result of it’s a single speaker. We used an aux cable and related it to a candy old-fashioned Speck speaker constructed for 30-pin connector iPods.

That improved the sound instantly, however if you happen to’re used to your sound coming from the identical path as your picture, having the sound behind you might be bizarre to get used to.

There’s a Bluetooth audio icon on the settings web page that obtained me excited to have the ability to join the projector to a bluetooth speaker. That was brief lived pleasure because the function lets you join a cellphone and play audio by the projector’s speaker or aux-connected speaker. In actual fact, it robotically kills the projected picture. Bluetooth to a speaker would have been an amazing addition.

Choosing both HDMI or USB from the inputs works as you’ll anticipate. Selecting from Android, iOS, Mac or Home windows prompts you to connect with the EZCast by wifi for mirroring your show.

I’m undecided the place the information throughput falls brief in mirroring mode from my iPhone, however I couldn’t get video to stream with out stuttering. It did work nice for searching pictures although.

Choosing EZCast provides you the next display with a QR code to obtain the Line Forged app for iOS. I finished proper there. On my Mac, the net’s hyperlink informed me it couldn’t be downloaded securely so I deserted that try as effectively.

I can mirror my display with their different enter choices already, and have a Roku related to the projector and each Airplay and even Chromecast ought to I would like it. I don’t need yet one more app with permissions to observe what we watch.

So what about portrait mode? Nicely I busted out the froth stands that really feel like these pedicure toe separators and set the projector in vertical mode.

It seems, you may’t do it on this orientation. The large lens must be sitting on the highest. The picture settings won’t even allow you to flip the picture to make it work. That is smart, however I’d want to search out the HDMI extension cable to maintain the Roku related. Regardless, as soon as flipped round, right here’s the consequence.

That tiny picture is the largest it would go with out transferring the projector additional away from the display (which may’t occur in our room). Additionally, as quickly as you activate portrait mode within the settings, all keystone and orientation controls get greyed out. I can’t see why you’ll need this orientation to start with, not to mention when all picture management is eliminated.

Nonetheless, the Beam V3 additionally works in ceiling mode which works like a appeal and is a really actual situation. Seize your pillows…

Seems to be like this with a corridor gentle on.

And with the lights out it actually shines.

For comparability, right here’s a shot from roughly three:30 within the afternoon. Fairly darn watchable.

After which the identical picture at 9pm when it’s clearly quite a bit darker.

Lastly, right here’s a fast video so you may see and listen to the projector in motion.

Last factor to notice is that we had a chunk of lint or mud contained in the lens that may’t be polished off. With any projector, be sure to open it up plug it in and take a look at for something which may immediate a return earlier than you get rid of any packaging. I’ll be reaching out to EZCast quickly on this difficulty.

What I like

  • Reasonably priced projector with an amazing efficiency
  • Brief throw for small rooms (or low ceilings)
  • Low operation noise

What I’d change

  • A foot design that helps regular, ceiling and portrait modes with out foam stands
  • I’d lose the “kitchen sink” strategy of how to attach something you may consider
  • Portrait mode seems like a final minute gimmick, with no picture adjustment

Last ideas

I’m going to decide on to concentrate on the truth that the EZCast Beam V3 is a good projector with a brief distance throw that works effectively in small areas. The HDMI performance is nice for a related machine like a Roku or a laptop computer. The speaker is lots loud to look at a film and it’s straightforward to attach higher audio system with the three.5mm aux connector. There’s a bunch of different options that miss the mark and lean towards gimmicks, however the core performance is stable and with the ability to watch a projected display in the midst of a sunny day or on a ceiling at night time brings a little bit of that magic again for me.

Value: $149.99
The place to purchase: Amazon
Supply: The pattern of this product was offered by EZCast


Assist The Gadgeteer:
The Gadgeteer’s most important sources of income are promoting and affiliate hyperlinks in articles like this one. Though we might obtain compensation, we all the time give our sincere opinions about our experiences with every product.

admin
the authoradmin

Leave a Reply

one × one =